420111, г. Казань, Телефоны:(843) 238-58-10E-mail:vestnik.kstu-kai@yandex.ru
|
АннотацииЛюди, проблемы, достиженияПАМЯТИ ПРОФЕССОРА П.А. КУЗЬМИНА В.М. Бородин, канд. техн. наук, Г.В. Голубев, докт. физ.-мат. наук, В ноябре 2008 г. исполняется 100 лет со дня рождения известного ученого в области теоретической и прикладной механики, Заслуженного деятеля науки и техники ТАССР, ближайшего ученика основателя КАИ Н.Г. Четаева, доктора физико-математических наук, профессора П.А. Кузьмина. Многие годы он проработал на кафедре теоретической механики, 37 лет был ее заведующим. On centenary anniversary of prof. P.A. Kuz’minV.M. Borodin, G.V. Golubev, V.A. Krenyov, and A.Yu. Khasanov In November of this year, we celebrate the centenary anniversary from birthday of prof. P.A. Kuz’min, doctor of physico-mathematical sciences, well-known scientist in the field of theoretical and applied mechanics, Honored Man of Science and Engineering (TASSR), the devoted follower of N.G. Chetayev (founder of Kazan Aviation Institute), who had worked at the Department of Theoretical Mechanics for a very long period of his life and was the Head of this chair in the course of thirty-seven years. Энергосиловые установкиОСОБЕННОСТИ МЕТОДА ИНТЕГРИРОВАННОГО ВОЗДЕЙСТВИЯ НА ПРОДУКТИВНЫЙ ПЛАСТ ПРИ ПРИМЕНЕНИИ ГОРИЗОНТАЛЬНЫХ СКВАЖИН Р.Н. Гатауллин, аспирант, Я.И. Кравцов, докт. техн. наук, Предложен оригинальный способ разработки залежей нефти и природных битумов с применением горизонтальных скважин. Суть метода – одновременное воздействие на продуктивный пласт тепловым и волновым полями. При этом предполагается обеспечить синхронно изменяющуюся частоту возбуждаемых акустических колебаний и периодически – неизменную разницу фаз. Теплота и упругие волны распространяются в пласте и воздействуют на процесс фильтрации в нем, что способствует интенсификации процесса добычи нефти. Показано, что максимальный положительный эффект интегрированного воздействия достигается в диапазоне частот, при которых наблюдается резонанс в системе «излучатель колебаний давления – продуктивный пласт». Some features of the technique for combined action upon productive stratums with use of horizontal wellsR.N. Gataullin, Ya.I. Kravtsov, and S.Ya. Kokhanova In this paper, we suggest using the original technique for natural bitumen and oil pool development with use of horizontal wells. The essence of this technique is in the simultaneous action of thermal and wave fields upon the productive stratum. When applying the technique, it is necessary to ensure the synchronically varying frequency of excited acoustic vibrations and maintain periodically the constant difference of phases. In the stratum, heat and elastic waves propagate and act on the process of filtration in it contributing thereby the process of oil production stimulation. We show also that the maximum possible positive effect can be attained by choosing the range of frequencies at which the resonance is observed (in the “pressure disturbance radiator – productive stratum” system). МАТЕМАТИЧЕСКОЕ МОДЕЛИРОВАНИЕ В ЭНЕРГЕТИЧЕСКОМ АУДИТЕ АГРЕГАТОВ С ГАЗОТУРБИННЫМ ПРИВОДОМ Б.М. Осипов, канд. техн наук, А.В. Титов, канд. техн. наук, Рассматриваются вопросы математического моделирования в энергетическом аудите. Предлагается методика энергетического аудита агрегатов с газотурбинным приводом. Освещаются сложности и преимущества данного подхода. Mathematical simulation in the energy audit of gas turbine-driven units and assembliesB.M. Osipov, A.V. Titov, and A.R. Khammatov We consider some problems about mathematical simulation in the energy audit suggest using the technique for energy audit of gas-turbine units and assemblies. Also presented here is the description of merits and demerits of the approach given. Технология машиностроенияПОЗИЦИОНИРОВАНИЕ ЛАЗЕРНОГО ИЗЛУЧЕНИЯ ОТНОСИТЕЛЬНО СВАРНОГО ШВА КАК ПОКАЗАТЕЛЬ КАЧЕСТВА ТЕХНОЛОГИЧЕСКОГО ПРОЦЕССА В.В. Звездин, канд. техн. наук, А.В. Хамадеев, соискатель, Камская государственная инженерно-экономическая академия, Набережные Челны On positioning of laser radiation with respect to weld seams as the index of technological process qualityV.V. Zvezdin, A.V. Khamadeyev, R.G. Zagirov, and I.R. Shangarayev We present here some features of forming the weld seam with unknown curvature and show that the quality of technological process of welding depends not only on the energy characteristics of the laser technological complex and welding bath temperature but also on the positioning accuracy of laser radiation focusing. As the estimate of technological process quality, use is made of the accuracy of focus positioning with respect to the weld seam. The herein-presented approach makes it possible to construct the automatic system for laser technological process control and retain the predetermined value of laser beam positioning with respect to the seam welded. ИНДИВИДУАЛЬНО-ДИНАМИЧЕСКОЕ УКРУПНЕННОЕ НОРМИРОВАНИЕ ТРУДА И.Ш. Шарафеев, канд. техн. наук Представлены способы нормирования труда с использованием компьютерных технологий: автоматизированный и автоматический. Показана разновидность автоматизированного проектирования норм труда, основанная на процедуре самообучаемости. Рассматриваются методологические аспекты процедуры «самообучаемость». Individual dynamic work measurementI.Sh. Sharafeyev In this paper, we present two techniques for work measurement with use of computer technologies, i.e., the computer-assisted and automatic ones. We demonstrate a variant of computer-assisted design that is based on the self-learning procedure and consider a number of methodological aspects of this notion. АВТОМАТИЗИРОВАННЫЙ ДИАГНОСТИЧЕСКИЙ КОМПЛЕКС ДЛЯ КОНТРОЛЯ КЛЕПАНОГО СОЕДИНЕНИЯ ЛОПАТОК ГТУ А.В. Бусаров, аспирант, В.Н. Тырышкин, магистр,
Ю.В. Ваньков, докт. техн. наук Рассмотрена задача диагностики клепаных соединений лопаток статорных колес ГТУ НК-16-18СТ. Описаны разработанный автоматизированный диагностический комплекс и программа «Detect Fault», созданная на базе LabView. Приведена методика инструментального контроля клепаного соединения, основанная на методе свободных колебаний. Computer-assisted diagnostic complex for checking of GTPP blade riveted connectionsA.V. Busarov, V.N. Tyryshkin, and Yu.V. Van’kov We consider here the problem on diagnostics of riveted connections in blades of stator rings of gas turbine power plants NK-16-18ST. We describe the computer-assisted diagnostic complex and the LabVIEW-based program Detect Fault. Also presented is the technique for tooling checkup of riveted connections with use of free-oscillation method. ПРИМЕНЕНИЕ ВЕЙВЛЕТ-АНАЛИЗА ДЛЯ ОПРЕДЕЛЕНИЯ ДЕФЕКТОВ ПОДШИПНИКОВ КАЧЕНИЯ М.В. Акутин, аспирант, Ю.В. Ваньков, докт. техн. наук, А.Е. Кондратьев, канд. техн. наук Рассмотрена вибродиагностика подшипников качения с применением программной среды LabView. Application of wavelet Analysis at determining the defects in Roller bearingsM.V. Akutin, Yu.V. Van’kov, and A.E. Kondrat’yev We consider here the technique for vibration diagnostics of roller bearings with use of software environment LabView. For this, we use the continuous wavelet-transformation and compare the scaling diagrams of defected and defect-free bearings with use of the PSNR metric. Измерительные и управляющие системыИЗМЕРЕНИЕ ПОЛОСЫ ПРОПУСКАНИЯ РЕЦЕПТИВНЫХ ПОЛЕЙ НЕЙРОНОВ ЗРИТЕЛЬНОЙ СИСТЕМЫ В.В. Роженцов, канд. техн. наук Measurements of pass band in receptive fields of vision system neuronsV.V. Rozhentsov We consider here the method and device that have been developed to measure the pass band in the receptive fields of vision system neurons. Also presented are some results of experimental studies conducted. ПЕРСПЕКТИВЫ СОЗДАНИЯ И ВНЕДРЕНИЯ МЕДИЦИНСКОЙ ОПТИКО-ЭЛЕКТРОННОЙ АППАРАТУРЫ НА ОСНОВЕ НЕКОГЕРЕНТНЫХ ИСТОЧНИКОВ СВЕТА А.И. Ларюшин, докт. техн. наук, В.А. Новиков, соискатель Представлены On prospects of creation and introduction of medical optico-electronic devices with use of incoeherent light sourcesA.I. Laryushin and V.A. Novikov We present some results of studies and developments of new optico-electronic devices for use in physiotherapy and dermatology and discuss the problem on influence of coherence ratio upon the biological and therapeutic action of radiation. As radiation sources, we chose the high-radiance light-emitting diodes, thermal, and gas-discharge lamps. We developed and introduced into medical practice a number of new light therapeutic devices, and give their functional characteristics. РадиоэлектроникаСИНТЕЗ МНОГОМОДОВЫХ ОПТИЧЕСКИХ ВОЛОКОН С РЕВЕРСИВНОЙ ДИФФЕРЕНЦИАЛЬНОЙ МОДОВОЙ ЗАДЕРЖКОЙ А.В. Бурдин, канд. техн. наук Представлено обобщение приближения Гаусса на случай расчета параметров передачи направляемых мод произвольного порядка, распространяющихся в слабонаправляющих волоконных световодах с произвольным осесимметричным профилем показателя преломления, и его приложение для решения задачи синтеза кварцевых многомодовых оптических волокон с реверсивной дифференциальной модовой задержкой. On synthesizing the multimode optical fibers with reversible differential delay of modesA.V. Burdin In this paper, we present the generalization of Gaussian approximation for the case when it is necessary to ДВОЙНАЯ ЗАЩИТА ПОРОГОВОГО ОБНАРУЖИТЕЛЯ ИМПУЛЬСНОГО СИГНАЛА Р.М. Хаиров, канд. техн. наук Анализируется адаптированный к параметрам «формы» непрерывной случайной помехи пороговый обнаружитель импульсного сигнала, аддитивно смешанного с помехой. В обнаружителе установлена двойная защита от ложного срабатывания: в виде порога ограничения уровня помехи и порога ограничения длительности положительных выбросов помехи над установленным уровнем. Совместное действие двух защит распределяет вероятность ложного обнаружения по двум статистически связанным событиям: Double protection of threshold detector of impulse signalsR.M. Khairov In this paper, we analyze operation of the threshold detector of impulse signals (additively mixed with a disturbance) that is well adapted to the parameters of continuous random disturbance pattern. The detector incorporates the double system of protection from false response, more specifically, the system for threshold limitation of disturbance level and the system for threshold limitation of disturbance tail duration in accordance with the level prescribed. Joint operation of these two systems of protection makes it possible to distribute a probability of false detection using as the base two statistically related events: the event 1 (threshold crossing of disturbance limitation level at a time instant ti) and event 2 (formation of disturbance tail with duration t/ti). All this taken together makes it possible to decrease many times over a probability of false detection in cases of corresponding admissible deteriorations of the detector sensitivity to a value and duration of the signal proper. Математика и механикаГОЛОГРАФИЧЕСКАЯ ИНТЕРФЕРОМЕТРИЯ ДЛЯ ИССЛЕДОВАНИЯ СОБСТВЕННЫХ ФОРМ КОЛЕБАНИЙ ПРЯМОУГОЛЬНЫХ КОНСОЛЬНЫХ ПЛАСТИН Р.Х. Макаева, канд. техн. наук, А.М. Царева, канд. техн. наук,
А.Х. Каримов, докт. техн. наук Приведены результаты исследований собственных форм и частот колебаний прямоугольных консольных пластин. Рассмотрено влияние размеров и материалов пластин. Показана идентичность форм колебаний пластин и пера лопаток компрессора ГТД. ON holographic interferometry in studies of eigenvibrations in single-sidedly supported platesR.Rh. Makaeva, A.M. Tsaryova, and A.Kh. Karimov We present some data of studies about eigenvibrations and vibration frequencies in rectangular single-sidedly supported plates and consider influence exerted by the sizes and materials the plates are made from. Also shown is the identity of eigenvibrations and those of GTE compressor blade airfoil portion. СПОСОБ БЫСТРОЙ ОЦИФРОВКИ ПОВЕРХНОСТЕЙ ВТОРОГО ПОРЯДКА Г.М. Набережнов, канд. техн. наук, Н.Н. Максимов, аспирант Рассмотрены вопросы, связанные с оцифровкой криволинейных поверхностей. Такая задача встречается в числовом программном управлении, при полигонизации 3D объекта в компьютерной графике и др. Для поверхностей второго порядка разработан способ оцифровки, обладающий высокой точностью и скоростью реализации. A technique for fast digitization of second-order surfacesG.M. Naberezhnov and N.N. Maksimov We consider here some problems connected with digitization of curvilinear surfaces. Such a problem can be met, for instance, in the numerical program control, at cell formation of 3-D objects in the computer graphics, and some others. Also developed as applied to the second-order surfaces is the digitization technique that is distinguished by pinpoint accuracy and speed of realization. АНАЛИТИЧЕСКИЙ И ЧИСЛЕННЫЙ АЛГОРИТМы ОПРЕДЕЛЕНИЯ ЗНАЧЕНИЙ ФУНКЦИИ УГЛА РАССЕИВАНИЯ МОЛЕКУЛ В ГАЗАХ ПРИ ИХ ВЗАИМОДЕЙСТВИИ И.В. Анисимова, канд. физ.-мат. наук Предлагаются аналитический и численный алгоритмы вычисления значений функции угла рассеивания взаимодействующих молекул на основе кинетической теории газов. Проблема нахождения значений функции угла рассеивания является одной из важных и используется при вычислении коэффициентов переноса в реагирующих газовых потоках. Для определения значений функции угла рассеивания молекул на множестве R используется несобственный интеграл с ограничением, усложняющим применение классической теории интегрирования. Впервые приведены асимптотический и приближенный алгоритмы вычисления значений функции угла рассеивания взаимодействующих молекул газа в зависимости от их характерных параметров и обобщенного степенного потенциала взаимодействия. Analytical and numerical algorithms for determining the values of functions of gas molecules angular dispersion at their interactionI.V. Anisimova Based on the kinetic theory of gases, we suggest using here a number of analytical and numerical algorithms for calculating the values of functions of interacting molecules. This problem is considered as one of the most important ones and is used when calculating the coefficients of transfer in the reacting gas flows. In order to determine the values of functions of molecules angular dispersion on the set R, we use the improper integral with restraint complicating the application of classical theory of integration. We present also the asymptotic and approximate algorithms for calculating the values of functions of interacting gas molecules dispersion depending on their characteristic parameters and generalized power potential function of interaction. Физика и химияНАНОМАГНИТНЫЕ ЖИДКОСТИ В ЭНЕРГОСБЕРЕГАЮЩИХ ТЕХНОЛОГИЯХ Е.П. Чеклаукова, аспирант, А.Н. Глебов, докт. хим. наук,
С.М. Шавалеева, канд. хим. наук, Предлагается новый тип энергетических генераторов – магнитножидкостных, работающих на основе магнитных наножидкостей. Приведено описание их получения, свойств и применения; теоретические Use of nanoMagnetic liquids in energy-saving technologiesE.P. Cheklaukova, A.N. Glebov, S.M. Shavaleyeva, and I.N. Aleyev We suggest using here a new type of electric power generators, i.e., generators that use the magnetic nanoliquids. We describe also the process of their manufacture, properties, and applications. Also presented are the theoretical and experimental data on formation of magnetic liquids motion under the action of magnetic fields. ФОРМИРОВАНИЕ ПЛАЗМЕННОГО ПОТОКА С ПОМОЩЬЮ РАЗРЯДА С ЖИДКИМ ЭЛЕКТРОЛИТНЫМ КАТОДОМ И ЕГО ХАРАКТЕРИСТИКИ Р.Н. Тазмеева, ст. преп., Р.Р. Зиганшин, докт. техн. наук Экспериментально исследованы процессы формирования потока плазмы в газовом разряде с жидким электролитным катодом. Разряд горел при атмосферном давлении в диффузной форме. Показано, что при разрядном токе 10 А и более поток плазмы, образуемый из паров электролита, имеет приемлемые для технологических применений параметры. Formation of plasma flow by means of discharge with liquid electrolytic cathode and its characteristicsR.N. Tazmeyeva and R.R. Ziganshin In this paper, we examine experimentally the processes of plasma flow formation in gas discharge with liquid electrolytic cathode. The diffusive burning of discharge was maintained at atmospheric pressure and we show that plasma flow formed by electrolyte vapors possesses, in the presence of discharge current of 10 A and more, the suitable technological parameters. МОДИФИКАЦИЯ ПОВЕРХНОСТИ МЕТАЛЛОКОРДА В ВЫСОКОЧАСТОТНОЙ ПЛАЗМЕ И.Ш. Абдуллин, докт. техн. наук, В.С. Желтухин, докт. физ.-мат. наук, Исследуется влияние обработки высокочастотной плазмой пониженного давления на адгезионные свойства поверхности латунированного металлокорда, используемого в шинной промышленности. Modification of the metal cord surface in Radio-frequency plasmaI.Sh. Abdullin, V.S. Zheltukhin, I.R. Sagbiyev, and R.F. Sharafeyev We study here the influence of low pressure radio-frequency plasma processing upon adhesive properties of brass metal cord used in tire industry. ХАРАКТЕРИСТИКИ ИОННОГО ПОТОКА НА ПОВЕРХНОСТИ ОБРАЗЦА В ВЫСОКОЧАСТОТНОЙ ПЛАЗМЕ И.Ш. Абдуллин, докт. техн. наук, В.С. Желтухин, докт. физ.-мат. наук, Исследуются характеристики ионного потока, поступающего на поверхность материалов в процессе обработки их в высокочастотном разряде при давлении плазмообразующего газа 13,3 – 133 Па, расходе от 0 до 0,1 г/с, потребляемой мощности в разряде от 0,1 до 2 кВт, частоте генератора 13,56 МГц. Parameters of ion plasma flow on the sample surface at material processing by the radio-frequency capacitative dischargeI.Sh. Abdullin, V.S. Zheltukhin, I.R. Sagbiyev, and M.F. Shayekhov In this paper, we study the low pressure RF plasma parameters at material processing when gas pressure was varied from 13.3 up to 133 Pa, gas consumption was varied up to 0.1 g/s, gas power was varied from 0.1 up to 2 kW, and generator frequency of 13.56 MHz. ИССЛЕДОВАНИЕ ВЛИЯНИЯ ПРИРОДЫ ОЛИГОЭФИРГЛИКОЛЯТОВ КАЛИЯ НА КИНЕТИКУ АНИОННОЙ ПОЛИМЕРИЗАЦИИ АРОМАТИЧЕСКИХ ИЗОЦИАНАТОВ А.М. Гумеров, канд. техн. наук, И.М. Давлетбаева, докт. хим. наук, Представлены результаты исследования влияния природы олигоэфиргликолятов калия на кинетику анионной полимеризации ароматических изоцианатов. Идентификация механизма изучаемого процесса проводилась путем математического моделирования. Установлена взаимосвязь между кинетическими параметрами реакции и электрофизическими свойствами полученных полимеров. Studies of influence of potassium oligoetherglicolates nature upon kinetics of anionic polymerizationA.M. Gumerov, I.M. Davletbayeva, A.V. Naumov, and V.F. Shkodich We present here some data on influence of potassium oligoetherglicolate nature upon the kinetics of anionic polymerization of aromatic isocyanates. Identification of the process mechanism was executed by means of mathematical simulation; as a result, we established the interrelation between the kinetic parameters of reaction and electrophysical properties of polymers obtained. СУБ- И СВЕРХКРИТИЧЕСКИЕ ФЛЮИДЫ В ЗАДАЧАХ ПРОИЗВОДСТВА И РЕГЕНЕРАЦИИ ПАЛЛАДИЕВОГО КАТАЛИЗАТОРА С ИСПОЛЬЗОВАНИЕМ СВЕРХКРИТИЧЕСКОГО ДИОКСИДА УГЛЕРОДА Т.Р. Билалов, аспирант, Ф.М. Гумеров, профессор, Х.Э. Харлампиди, профессор, Г.И. Федоров, ст. науч. сотр. Проведен синтез хлорида палладия и органометаллических комплексов на его основе, исследована их растворимость в сверхкритическом диоксиде углерода, проведена пропитка гамма-оксида алюминия тремя органометаллическими комплексами при температуре 55 °С и давлении 28 МПа, приводится описание растворимости с использованием уравнения Пенга – Робинсона. Исследована кинетика регенерации палладиевого катализатора сверхкритическими диоксидом углерода и пропан-бутановой смесью, а также влияние числа Рейнольдса и направления движения потока экстрагента на скорость регенерации. use of Close-to-critical and supercritical fluids in the problems of palladium catalyst production and regeneration with use of supercritical carbon dioxideT.R. Bilalov, F.M. Gumerov, Kh.E. Kharlampidi, and G.I. Fyodorov We describe here a process of synthesizing the palladium chloride and its organometallic complexes and study the solubility of these complexes in the supercritical carbon dioxide. We executed also the impregnation of aluminum gamma oxide by three organometallic complexes at temperature of 55 °С and pressure of 28 MPa. We describe also the process of solubility with use of Peng – Robinson equation and examine the kinetics of palladium catalyst regeneration by supercritical carbon dioxide and propane-butane mixture. Also investigated here is the influence of Reynolds number and extractant flow direction upon the rate of regeneration. Информатика и управлениеМОДЕЛЬ ЛОКАЛИЗАЦИИ ИСКАЖЕНИЙ И ПОДТВЕРЖДЕНИЯ АВТОРСТВА ИСХОДНЫХ ТЕКСТОВ ПРОГРАММ В.И. Глова, докт. техн. наук, А.С. Катасев, канд. техн. наук,
А.Р. Абзалов, аспирант Описывается модель адаптивной цифровой подписи для подтверждения авторства и целостности исходных текстов программ, а также локализации искаженного участка кода. Рассмотрены цели и задачи использования модели. Актуализована необходимость ее разработки и реализации программного комплекса на базе данной модели. Эффективность предложенной модели подтверждена в учебном процессе кафедры систем информационной безопасности. Model for localization of distortions and authorship acknowledgement of source program textsV.I. Glova, A.S. Katasev, and A.R. Abzalov We describe here the model for adaptive digital signature used to acknowledge the authorship and integrity of source texts of programs as well as to localize the code area distorted. We consider the model goals and its applications, as well as substantiate the necessity of its development and realization the model-based software complex. The efficiency of the herein-presented model is corroborated in the course of its approbation in educational process of Data Security Department. ПОЛЯРИЗАЦИЯ ТЕПЛОВОГО ИЗЛУЧЕНИЯ КАК ИНФОРМАТИВНЫЙ ПАРАМЕТР ПРОЦЕССА ВЗАИМОДЕЙСТВИЯ ЛАЗЕРНОГО ИЗЛУЧЕНИЯ С МЕТАЛЛАМИ В.В. Звездин, канд. техн. наук, А.В. Хамадеев, соискатель, Изложены особенности формирования теплового излучения из зоны взаимодействия лазерного луча с металлом. Показано, что оно характеризуется параметрами вектора Стокса. Измерение степени поляризации суммарного излучения металла и плазмы позволяет судить об изменении геометрии излучающей поверхности и определять критические значения степени поляризации для данного металла, при котором происходит выброс металла из зоны взаимодействия. В результате критерием оценки качества упрочненного слоя можно считать степень поляризации теплового излучения, измеряемую в реальном времени хода технологического процесса. Это позволяет построить систему автоматического управления лазерным технологическим комплексом со стабилизацией заданных показателей качества технологического процесса. Polarization of thermal radiation as the informative parameter of interaction between laser radiation
|
2008 3 |